Share

Building Automation

///Building Automation

With enhancements in technology taking place at lightning speed, we, humans crave for a more technologically advanced and comfort living. Building automation is one such endeavor in this direction, essentially referring to a Building Management System (BMS) or Building Automation System (BAS) that includes systems such as lift, alarm, fire detection, parking sensors, air conditioning, etc. These systems are connected to the internet and can be monitored from remote places. Also, multiple buildings can be monitored by a central base station through the internet.

Building Automation Systems lead to energy conservation, improved and comfortable living and reduced operating costs. Vacker UAE is doing building automation in places like Sharjah, Fujairah, Dubai, Abu Dhabi, Umm al Quwain and Ras al Khaimah.

Building Management System’s major parameters

Building Automation System Vacker UAE

There are lots of parameters to be controlled when performing building automation. Some of them are mentioned below in a decreasing sequence of impact:

  • Monitoring of fire and smoke in the building
  • Leakage of gas and its effects - Gas Sensors
  • Access control
  • System of surveillance
  • Ventilation for heating and Air conditioning
  • Tanks’ water level
  • Critical rooms’ temperature
  • Critical rooms’ humidity
  • Internal and external light levels of the buildings and rooms
  • Motion Sensors and Presence Sensors for sensing motion and presence of people respectively.

Other parameters can be monitored by using various sensors.

Building Management System Protocols

Within a BMS, a communication language or protocol is used for transmission of signals between the system components and a central processor. A BMS will usually have a large number of components interconnected to each other, communicating through the protocol. Manufacturers of components have their own protocols, with some prominent ones being BACnet, Modbus, KNX, Lonworks, etc. Further amendments, if any, to the system, require usage of components adhering to the same protocol. However, one can use an interface component to integrate with components using different protocols. KNX is an example of one such open interface protocol component.

Building Automation Systems for residential apartments, villas and buildings

These are home automation systems of a smaller scale. Vacker UAE operates in regions of UAE such as Sharjah, Fujairah, Dubai, Abu Dhabi, Umm al Quwain and Ras al Khaimah. Few examples of small building automations are listed below:

  • Automated home theatres in which the video being played will be paused or volume will be reduced automatically based on any external hindrance like a phone ring.
  • Depending on the sun rays’ intensity, curtains will be automatically drawn in order to reduce direct penetration of the rays.
  • Switching on/off the air conditioning system can be done through voice commands.
  • Sending SMS or using mobile apps to switch on/off the air conditioning system, lights, heater of the room or building.
  • Lighting of the house based on the time of the day or sunlight intensity.
VBot